Evaluation of Sustainability-Oriented Route to Produce CoCrFeNi High-Entropy Alloy Spherical Agglomerates Using Hydrogen Reduction.
vol.13 iss.5 (2026) pp.12 Framework Guided by Environmental Analysis for Comparing Manufacturing Alternatives in Laser Cutting.
vol.13 iss.5 (2026) pp.19 Large-field-of-view, high-resolution imaging of microfeatures via geometry-optimized reattachable lens and deep learning-based super-resolution.
vol.13 iss.5 (2026) pp.18 Drilling Performance of Cemented Carbide Microdrill Cutting Edges Prepared by Shear Thickening Polishing.
vol.13 iss.5 (2026) pp.23 Integrated Fabrication of Glass Microfluidic Devices Using PCD Microgrinding and Calcium-Assisted Bonding.
vol.13 iss.5 (2026) pp.12 Thermally and Structurally Robust Design of Through Glass via Arrays Using Multi-objective Optimization and Machine Learning-Based Geometry Prediction.
vol.13 iss.5 (2026) pp.17 Strategy of Cost Reduction in Copper Chemical Mechanical Polishing: Enhancing Removal Rate and Uniformity Via a Novel Slurry Sweep Mode.
vol.13 iss.5 (2026) pp.16 Thermal Behavior in Micro-Grinding of Ti-6Al-4V Using an Environmentally Friendly Nanofluid-Based Air-Flow-Assisted Electrospray Lubrication (AF-ESL).
vol.13 iss.5 (2026) pp.16 Investigation of the Machinability Characteristics Using Dry Electrostatic Cooling (DEC) for the Turning Process of SCr420H.
vol.13 iss.5 (2026) pp.15 Energy-efficient Conformal Mold Cooling Using Additively Manufactured Microcellular Thermal Metamaterials.
vol.13 iss.5 (2026) pp.14 Impact of Powder Reuse, Laser Scanning Strategies and Heat Treatment on the Microstructure, Mechanical, and Electrochemical Properties of LPBF 316L Stainless Steel.
vol.13 iss.5 (2026) pp.20 The Three-Dimensional Characteristics and Formation Mechanism of Microscopic Pores in Steel-Aluminum Laser Welding.
vol.13 iss.5 (2026) pp.15 Study on Fretting Wear Mechanism and Optimization Technology of Aluminum Alloy Clinched Joints.
vol.13 iss.5 (2026) pp.13 Ultra-High-Strength Cross-Tension Metal-Composite Joints via Wobble Angular-Laser-Structured, Injection-Molded Interlocking.
vol.13 iss.5 (2026) pp.17 Non-Calcination Production of Calcium Hydroxide via Plasma-Activated Water for Sustainable Supplementary Cementitious Material.
vol.13 iss.5 (2026) pp.28 Early Fault Warning Framework for Offshore Wind Turbine Pitch Systems Using Relief Feature Selection and SSA-Optimized SABiLSTM.
vol.13 iss.5 (2026) pp.21 Low-Temperature O-ring Leak Testing for High Pressure Hydrogen Gas Applications.
vol.13 iss.5 (2026) pp.13 Numerical Investigations of Mass Transport Improvement Techniques of Flow Channels for PEMFCs.
vol.13 iss.5 (2026) pp.17 Synergistic Interplay Between a Hydrophilic TiO2-Coated Microporous Layer and Flow Field Architecture for Enhanced Durability of Low-Humidity PEMFCs.
vol.13 iss.5 (2026) pp.19 Design and Manufacturing of a High-Speed Motorized Spindle: Engineering Challenges and Insights.
vol.13 iss.5 (2026) pp.24 Adaptive Energy Optimization Based on Fuel Cell Degradation Prediction for Fuel Cell Hybrid Electric Vehicles.
vol.13 iss.5 (2026) pp.16 Revealing the Structural Transformation of Biopolymer-Modified Clay Materials Through Microtomography and Hygroscopic Analysis.
vol.13 iss.5 (2026) pp.14 Gold nanoparticles synthesized by laser ablation in saline medium: an assessment of colloidal stability.
vol.13 iss.5 (2026) pp.28 Real-Time Structural Health Monitoring with Bayesian Neural Networks: Distinguishing Aleatoric and Epistemic Uncertainty for Digital Twin Frameworks.
vol.13 iss.5 (2026) pp.15 Lean Energy Analysis for Smart Manufacturing: An Interpretable and Scalable Framework for Industrial Energy Modeling.
vol.13 iss.5 (2026) pp.21 Smart Operation Platform for Railway Rolling Stock Production Using Digital Twin and AI.
vol.13 iss.5 (2026) pp.25 A Representative Volume Element-Based Approach for Predicting Sintering Shrinkage in Metal Binder Jetting.
vol.13 iss.5 (2026) pp.8 Next-Generation Catalysts from Spent Lithium-ion Battery Cathodes: A Sustainable Recycling Paradigm.
vol.13 iss.5 (2026) pp.26 Mass Customization Through Additive Manufacturing: Review of Technologies, Applications, and Scalability Challenges.
vol.13 iss.5 (2026) pp.28 Material Selection and Performance Trends in Triboelectric Nanogenerators (TENG): A Comprehensive Analysis of Electrode and Voltage Outcome.
vol.13 iss.5 (2026) pp.35 Challenges and Innovations in Chemical Mechanical Polishing in the More-than-Moore Era.
vol.13 iss.5 (2026) pp.40 Towards Sustainable Machining: A Comprehensive Review of Energy-Reduction Strategies in Machine Tools.
vol.13 iss.5 (2026) pp.45 Current Applications and Advancements in the Manufacturing of Discontinuous Fiber Composites.
vol.13 iss.5 (2026) pp.38 Flow Channels-Integrated Porous Media and Foam-Based Gas Diffusion Layer-Less Flow Fields as Next-Generation Strategies for Proton Exchange Membrane Fuel Cells: A Review of Recent Advances.
vol.13 iss.5 (2026) pp.20 Design Principles and Fabrication Methods for Polymeric Re-entrant Structures for Omniphobic Surfaces.
vol.13 iss.5 (2026) pp.15 Research on Grinding Parameter Optimization Method Considering Sapphire Grinding Quality.
vol.13 iss.4 (2026) pp.30 Flow Field Behavior and Material Removal Characteristics of Constrained-Flow-Field Force-Rheological-Polishing.
vol.13 iss.4 (2026) pp.13 A Novel Hybrid Lubri-Cooling Approach for Machining of Ti-6Al-4V Through Combination of Pulsated Minimal Quantity Lubrication and Dry Ice Media.
vol.13 iss.4 (2026) pp.17 Performance Evaluation of Sustainable C/L Strategies in Milling Carpenter® 20: Towards Green Manufacturing with Cryo + NF-MQL and Quenched Tool.
vol.13 iss.4 (2026) pp.24 Innovative Approach for Rapidly Predicting Cooling Times in Aluminum-Filled Epoxy Composite Injection Molding Using Numerical Simulation and Rapid Tooling Technology.
vol.13 iss.4 (2026) pp.23 Temperature Field Modeling in Milling Under Tool Fatigue Damage Induced Thermal-Conductivity Degradation.
vol.13 iss.4 (2026) pp.20 In-situ Alloying of Tantalum–Tungsten Via Laser Powder Bed Fusion: Microstructure, Mechanical, and Acoustic Properties.
vol.13 iss.4 (2026) pp.14 AI-Based Mechanical Properties Prediction of Sintering-Aging Combined Effect in Metal-Material Extrusion.
vol.13 iss.4 (2026) pp.19 Rheology-Informed Simulation Framework for Predicting Fiber Orientation in Material Extrusion Process.
vol.13 iss.4 (2026) pp.20 Evaluating the Interfacial Microstructure and Mechanical Behavior ofHybrid Additive Manufactured AISI H13 Tool Steel.
vol.13 iss.4 (2026) pp.15 Green Hybrid Manufacturing of 3-Dimensional Fe–6.5%Si Magnetic Cores Integrated with Insulation Layers Via Material Extrusion and Spark Plasma Sintering.
vol.13 iss.4 (2026) pp.18 FDM-Based Additive Manufacturing of Stainless Steel Electrodes Using Graphite-Assisted Sintering for Energy Storage Applications.
vol.13 iss.4 (2026) pp.18 An Analytical Framework for Correlation Between Laser Powder Bed Fusion Factors and Porosity-Induced Fracture Strength and Plasticity.
vol.13 iss.4 (2026) pp.41 Precision Additive Manufacturing of Dental Scaffolds Using a Hydroxyapatite/Zirconia Bioceramic Composite Derived from Discarded Eggshells.
vol.13 iss.4 (2026) pp.17 Energy-Saving Solution for Hydraulic Excavators Using Electrical Boom Energy Regeneration System.
vol.13 iss.4 (2026) pp.18
vol.13 iss.5 (2026) pp.12 Framework Guided by Environmental Analysis for Comparing Manufacturing Alternatives in Laser Cutting.
vol.13 iss.5 (2026) pp.19 Large-field-of-view, high-resolution imaging of microfeatures via geometry-optimized reattachable lens and deep learning-based super-resolution.
vol.13 iss.5 (2026) pp.18 Drilling Performance of Cemented Carbide Microdrill Cutting Edges Prepared by Shear Thickening Polishing.
vol.13 iss.5 (2026) pp.23 Integrated Fabrication of Glass Microfluidic Devices Using PCD Microgrinding and Calcium-Assisted Bonding.
vol.13 iss.5 (2026) pp.12 Thermally and Structurally Robust Design of Through Glass via Arrays Using Multi-objective Optimization and Machine Learning-Based Geometry Prediction.
vol.13 iss.5 (2026) pp.17 Strategy of Cost Reduction in Copper Chemical Mechanical Polishing: Enhancing Removal Rate and Uniformity Via a Novel Slurry Sweep Mode.
vol.13 iss.5 (2026) pp.16 Thermal Behavior in Micro-Grinding of Ti-6Al-4V Using an Environmentally Friendly Nanofluid-Based Air-Flow-Assisted Electrospray Lubrication (AF-ESL).
vol.13 iss.5 (2026) pp.16 Investigation of the Machinability Characteristics Using Dry Electrostatic Cooling (DEC) for the Turning Process of SCr420H.
vol.13 iss.5 (2026) pp.15 Energy-efficient Conformal Mold Cooling Using Additively Manufactured Microcellular Thermal Metamaterials.
vol.13 iss.5 (2026) pp.14 Impact of Powder Reuse, Laser Scanning Strategies and Heat Treatment on the Microstructure, Mechanical, and Electrochemical Properties of LPBF 316L Stainless Steel.
vol.13 iss.5 (2026) pp.20 The Three-Dimensional Characteristics and Formation Mechanism of Microscopic Pores in Steel-Aluminum Laser Welding.
vol.13 iss.5 (2026) pp.15 Study on Fretting Wear Mechanism and Optimization Technology of Aluminum Alloy Clinched Joints.
vol.13 iss.5 (2026) pp.13 Ultra-High-Strength Cross-Tension Metal-Composite Joints via Wobble Angular-Laser-Structured, Injection-Molded Interlocking.
vol.13 iss.5 (2026) pp.17 Non-Calcination Production of Calcium Hydroxide via Plasma-Activated Water for Sustainable Supplementary Cementitious Material.
vol.13 iss.5 (2026) pp.28 Early Fault Warning Framework for Offshore Wind Turbine Pitch Systems Using Relief Feature Selection and SSA-Optimized SABiLSTM.
vol.13 iss.5 (2026) pp.21 Low-Temperature O-ring Leak Testing for High Pressure Hydrogen Gas Applications.
vol.13 iss.5 (2026) pp.13 Numerical Investigations of Mass Transport Improvement Techniques of Flow Channels for PEMFCs.
vol.13 iss.5 (2026) pp.17 Synergistic Interplay Between a Hydrophilic TiO2-Coated Microporous Layer and Flow Field Architecture for Enhanced Durability of Low-Humidity PEMFCs.
vol.13 iss.5 (2026) pp.19 Design and Manufacturing of a High-Speed Motorized Spindle: Engineering Challenges and Insights.
vol.13 iss.5 (2026) pp.24 Adaptive Energy Optimization Based on Fuel Cell Degradation Prediction for Fuel Cell Hybrid Electric Vehicles.
vol.13 iss.5 (2026) pp.16 Revealing the Structural Transformation of Biopolymer-Modified Clay Materials Through Microtomography and Hygroscopic Analysis.
vol.13 iss.5 (2026) pp.14 Gold nanoparticles synthesized by laser ablation in saline medium: an assessment of colloidal stability.
vol.13 iss.5 (2026) pp.28 Real-Time Structural Health Monitoring with Bayesian Neural Networks: Distinguishing Aleatoric and Epistemic Uncertainty for Digital Twin Frameworks.
vol.13 iss.5 (2026) pp.15 Lean Energy Analysis for Smart Manufacturing: An Interpretable and Scalable Framework for Industrial Energy Modeling.
vol.13 iss.5 (2026) pp.21 Smart Operation Platform for Railway Rolling Stock Production Using Digital Twin and AI.
vol.13 iss.5 (2026) pp.25 A Representative Volume Element-Based Approach for Predicting Sintering Shrinkage in Metal Binder Jetting.
vol.13 iss.5 (2026) pp.8 Next-Generation Catalysts from Spent Lithium-ion Battery Cathodes: A Sustainable Recycling Paradigm.
vol.13 iss.5 (2026) pp.26 Mass Customization Through Additive Manufacturing: Review of Technologies, Applications, and Scalability Challenges.
vol.13 iss.5 (2026) pp.28 Material Selection and Performance Trends in Triboelectric Nanogenerators (TENG): A Comprehensive Analysis of Electrode and Voltage Outcome.
vol.13 iss.5 (2026) pp.35 Challenges and Innovations in Chemical Mechanical Polishing in the More-than-Moore Era.
vol.13 iss.5 (2026) pp.40 Towards Sustainable Machining: A Comprehensive Review of Energy-Reduction Strategies in Machine Tools.
vol.13 iss.5 (2026) pp.45 Current Applications and Advancements in the Manufacturing of Discontinuous Fiber Composites.
vol.13 iss.5 (2026) pp.38 Flow Channels-Integrated Porous Media and Foam-Based Gas Diffusion Layer-Less Flow Fields as Next-Generation Strategies for Proton Exchange Membrane Fuel Cells: A Review of Recent Advances.
vol.13 iss.5 (2026) pp.20 Design Principles and Fabrication Methods for Polymeric Re-entrant Structures for Omniphobic Surfaces.
vol.13 iss.5 (2026) pp.15 Research on Grinding Parameter Optimization Method Considering Sapphire Grinding Quality.
vol.13 iss.4 (2026) pp.30 Flow Field Behavior and Material Removal Characteristics of Constrained-Flow-Field Force-Rheological-Polishing.
vol.13 iss.4 (2026) pp.13 A Novel Hybrid Lubri-Cooling Approach for Machining of Ti-6Al-4V Through Combination of Pulsated Minimal Quantity Lubrication and Dry Ice Media.
vol.13 iss.4 (2026) pp.17 Performance Evaluation of Sustainable C/L Strategies in Milling Carpenter® 20: Towards Green Manufacturing with Cryo + NF-MQL and Quenched Tool.
vol.13 iss.4 (2026) pp.24 Innovative Approach for Rapidly Predicting Cooling Times in Aluminum-Filled Epoxy Composite Injection Molding Using Numerical Simulation and Rapid Tooling Technology.
vol.13 iss.4 (2026) pp.23 Temperature Field Modeling in Milling Under Tool Fatigue Damage Induced Thermal-Conductivity Degradation.
vol.13 iss.4 (2026) pp.20 In-situ Alloying of Tantalum–Tungsten Via Laser Powder Bed Fusion: Microstructure, Mechanical, and Acoustic Properties.
vol.13 iss.4 (2026) pp.14 AI-Based Mechanical Properties Prediction of Sintering-Aging Combined Effect in Metal-Material Extrusion.
vol.13 iss.4 (2026) pp.19 Rheology-Informed Simulation Framework for Predicting Fiber Orientation in Material Extrusion Process.
vol.13 iss.4 (2026) pp.20 Evaluating the Interfacial Microstructure and Mechanical Behavior ofHybrid Additive Manufactured AISI H13 Tool Steel.
vol.13 iss.4 (2026) pp.15 Green Hybrid Manufacturing of 3-Dimensional Fe–6.5%Si Magnetic Cores Integrated with Insulation Layers Via Material Extrusion and Spark Plasma Sintering.
vol.13 iss.4 (2026) pp.18 FDM-Based Additive Manufacturing of Stainless Steel Electrodes Using Graphite-Assisted Sintering for Energy Storage Applications.
vol.13 iss.4 (2026) pp.18 An Analytical Framework for Correlation Between Laser Powder Bed Fusion Factors and Porosity-Induced Fracture Strength and Plasticity.
vol.13 iss.4 (2026) pp.41 Precision Additive Manufacturing of Dental Scaffolds Using a Hydroxyapatite/Zirconia Bioceramic Composite Derived from Discarded Eggshells.
vol.13 iss.4 (2026) pp.17 Energy-Saving Solution for Hydraulic Excavators Using Electrical Boom Energy Regeneration System.
vol.13 iss.4 (2026) pp.18
