Investigation of Manufacture of Hardfaced Forming Tools Using a Laser Engineered Net Shaping (LENS) Process.
vol.12 iss.4 (2025) pp.22 Intelligent Fault Diagnosis of Rolling Bearings in Strong Noise Environment: An Attention-Driven Hybrid Model Based on IENEMD and Parallel Multiscale CNN.
vol.12 iss.4 (2025) pp.26 Online Vibration Detection in High‑Speed Robotic Milling Process Based on Wavelet Energy Entropy of Acoustic Emission
vol.12 iss.4 (2025) pp.16 Efficient Optimization of Magnetic Properties of Fe–4.5Si Alloy in Laser Powder Bed Fusion (LPBF).
vol.12 iss.4 (2025) pp.14 Effect of Nozzle Geometry on the Injection Characteristics of Liquid CO2 as a Volatile Lubricant and Coolant for Aluminum Hot Stamping
vol.12 iss.4 (2025) pp.12 Control of Fluctuational Tension in Roll-to-Roll Manufacturing Systems under Acceleration and Deceleration Conditions.
vol.12 iss.4 (2025) pp.16 Directed Energy Deposition on Structurally Low-density Substrate and its Effects on Microstructural and Interfacial Bonding Characteristics
vol.12 iss.4 (2025) pp.19 Study on Surface Roughness and Fatigue Property of Abrasive Waterjet Peened Aluminum Alloy.
vol.12 iss.4 (2025) pp.14 Compressive Energy Dissipation Effects on Nonuniform Deformation and Material Conductance of Inhomogeneous Anisotropic Fibrous Porous Transport Layers
vol.12 iss.4 (2025) pp.24 Chatter Suppression in the Milling Process of Thin-walled Components with Continuous Sinusoidal Spindle Speed Variation.
vol.12 iss.4 (2025) pp.14 Experimental Study of Micro-Milling Carbon Fibre Reinforced Composites Under Variable Cooling And Lubrication Strategies.
vol.12 iss.4 (2025) pp.14 Multi Objective Optimization Research on Power Consumption and Stiffness of Internal Feedback Hydrostatic Turntable
vol.12 iss.4 (2025) pp.16 Ascorbic Acid-Assisted Morphology Tailoring of Crystalline Bi2WO6 for the Application in CO2 Photoreduction
vol.12 iss.4 (2025) pp.18 Strontium‑Doped BaZr0.8Ni0.2O3‑δ Cobalt‑Free Cathode Materials for Solid Oxide Fuel Cell
vol.12 iss.4 (2025) pp.13 Understanding Residual Stress and Microhardness Variations in LPBF Fabricated Ti-6Al-4V: Thermo-Mechanical Simulation and Experimental Insights Post Heat Treatment
vol.12 iss.4 (2025) pp.11 Comprehensive Analysis of Current Developments, Challenges, and Opportunities for the Health Assessment of Smart Factory.
vol.12 iss.4 (2025) pp.18 Real-Time Interface Prediction During Laser Processing of Thin Film Layers by High-Resolution Femtosecond Laser-Induced Breakdown Spectroscopy
vol.12 iss.3 (2025) pp.14 Development of an artificial neural network-based model for prediction and compensation of hole depth by femtosecond laser drilling
vol.12 iss.3 (2025) pp.14 Predicting Quality of Coated Layer Based on Meniscus Features Associated with Thickness for Sustainable Roll-to-Roll Processes
vol.12 iss.3 (2025) pp.16 Iterative Semi-auto-labeling Method for High-Frequency Induction Brazing
vol.12 iss.3 (2025) pp.23 AI-Driven Process Optimization Framework for Enhancing Print Quality in Aerosol Jet Printing
vol.12 iss.3 (2025) pp.15 Prediction of Normalized Material Removal Rate Profile Based on Deep Neural Network in Five-Zone Carrier Head CMP System
vol.12 iss.3 (2025) pp.15 Architecture Development of Digital Twin-based Wire Arc Directed Energy Deposition
vol.12 iss.3 (2025) pp.20 Energy Efficiency Optimisation in Wire arc Additive Manufacturing of Invar 36 Alloy via Intelligent Data-Driven Techniques
vol.12 iss.3 (2025) pp.13 Control-Resilient Roller Wear Prediction for Thin Wire Flattening Process via an Internal Sound-Guided Dynamic Conditional Network
vol.12 iss.3 (2025) pp.16 Design of stiffened ribs for improving forming defects of metal bipolar plate for PEMFC
vol.12 iss.3 (2025) pp.16 Data-Driven Approach for Fault Diagnosis of Harmonic Drives Using Wireless Acceleration Sensors and Machine Learning
vol.12 iss.3 (2025) pp.18 Enhancing Tool Wear Prediction Accuracy by Integrating Multi-Task Learning with Cutting Force Estimation
vol.12 iss.3 (2025) pp.21 Optimizing Bio-nano-silica Synthesis Processes from Rice Husk for Industrial-Scale Applications
vol.12 iss.3 (2025) pp.14 AGV Path Planning with Dynamic Obstacles Based on Deep Q-Network and Distributed Training
vol.12 iss.3 (2025) pp.17 Development of a Real-Time Track Solver for Digital Twin of the Underwater Tracked Vehicle
vol.12 iss.3 (2025) pp.14 Autonomous Thin-film Profile Predictions for Inkjet-Printed OLEDs from Aerial Microscopic Images using Deep Learning
vol.12 iss.3 (2025) pp.11 Multi-objective optimization for layout planning of matrix manufacturing system
vol.12 iss.3 (2025) pp.19 Machining and Sustainability Performance Comparison for the Milling Process of Al6082 Alloy Under Various Minimum Quantity Lubrication Conditions
vol.12 iss.2 (2025) pp.22 Flux Filling Rate Effect on Weld Bead Deposition of Recycled Titanium Chip Tubular Wire
vol.12 iss.2 (2025) pp.9 Application of Nanofluid Composite Electrostatic Spraying in Machining of Aluminum Alloy: Effects of External/Internal Fluids
vol.12 iss.2 (2025) pp.17 Integration of Cu-Doped TiO2 Nanoparticles on High Surface UV-Laser-Induced Graphene for Enhanced Photodegradation, De-icing, and Anti-bacterial Surface Applications
vol.12 iss.2 (2025) pp.14 Influence of Mechanochemical Effect on Deformation Behavior of Aluminum Cutting Layer Under Electrostatic Catalysis
vol.12 iss.2 (2025) pp.20 Machining-Induced Damage and Corrosion Behavior of Monel-400 Alloy Under Cryogenic Cooling Conditions: A Sustainable Initiative
vol.12 iss.2 (2025) pp.16 Enhancing Bond Strength Between Carbon Fiber Reinforced Thermoplastic and Aluminum Alloys Through Laser Surface Treatment
vol.12 iss.2 (2025) pp.11 Deposition Stability and Forming Characteristics in Laser-Arc Hybrid Additive Manufacturing of Aluminum Alloy Through Beam Oscillation
vol.12 iss.2 (2025) pp.19 Multiphysics Simulation of Continuous Liquid Interface Production (CLIP) 3D Printing Technology
vol.12 iss.2 (2025) pp.12 Bipolar Current Collectors of Carbon Fiber Reinforced Polymer for Laminates of Structural Battery
vol.12 iss.2 (2025) pp.12 Combinatorial Deposition of Pinhole-Free and High-Performance, Nanothin Electrolyte for Hydrogen-Fueled, Low-Temperature Solid Oxide Fuel Cells Supported on a Porous Substrate
vol.12 iss.2 (2025) pp.8 Techno-Economic Analysis of Grid-Connected Highway Solar EV Charging Station
vol.12 iss.2 (2025) pp.18 Numerical Investigation of In-Line and Staggered Trap Channels in the Serpentine Flow Field of PEMFCs
vol.12 iss.2 (2025) pp.16 Environment-Friendly, High-Performance Lignin-Derived and Polyvinyl Alcohol Blended Resin for All-Green Natural Fiber-Reinforced Composite
vol.12 iss.2 (2025) pp.13 Laser-Ablated Interlaced Micropatterns on CFRP and Ti-64 Plates to Improve Single-Lap Adhesive Joining Strength
vol.12 iss.2 (2025) pp.16 Optimization of Fiber Radiation Processes Using Multi-Objective Reinforcement Learning
vol.12 iss.2 (2025) pp.19 Application of Hybrid Nanofluids in MQL Assisted Machining Operations: Exploring Synergies and Establishing Guidelines
vol.12 iss.2 (2025) pp.33
vol.12 iss.4 (2025) pp.22 Intelligent Fault Diagnosis of Rolling Bearings in Strong Noise Environment: An Attention-Driven Hybrid Model Based on IENEMD and Parallel Multiscale CNN.
vol.12 iss.4 (2025) pp.26 Online Vibration Detection in High‑Speed Robotic Milling Process Based on Wavelet Energy Entropy of Acoustic Emission
vol.12 iss.4 (2025) pp.16 Efficient Optimization of Magnetic Properties of Fe–4.5Si Alloy in Laser Powder Bed Fusion (LPBF).
vol.12 iss.4 (2025) pp.14 Effect of Nozzle Geometry on the Injection Characteristics of Liquid CO2 as a Volatile Lubricant and Coolant for Aluminum Hot Stamping
vol.12 iss.4 (2025) pp.12 Control of Fluctuational Tension in Roll-to-Roll Manufacturing Systems under Acceleration and Deceleration Conditions.
vol.12 iss.4 (2025) pp.16 Directed Energy Deposition on Structurally Low-density Substrate and its Effects on Microstructural and Interfacial Bonding Characteristics
vol.12 iss.4 (2025) pp.19 Study on Surface Roughness and Fatigue Property of Abrasive Waterjet Peened Aluminum Alloy.
vol.12 iss.4 (2025) pp.14 Compressive Energy Dissipation Effects on Nonuniform Deformation and Material Conductance of Inhomogeneous Anisotropic Fibrous Porous Transport Layers
vol.12 iss.4 (2025) pp.24 Chatter Suppression in the Milling Process of Thin-walled Components with Continuous Sinusoidal Spindle Speed Variation.
vol.12 iss.4 (2025) pp.14 Experimental Study of Micro-Milling Carbon Fibre Reinforced Composites Under Variable Cooling And Lubrication Strategies.
vol.12 iss.4 (2025) pp.14 Multi Objective Optimization Research on Power Consumption and Stiffness of Internal Feedback Hydrostatic Turntable
vol.12 iss.4 (2025) pp.16 Ascorbic Acid-Assisted Morphology Tailoring of Crystalline Bi2WO6 for the Application in CO2 Photoreduction
vol.12 iss.4 (2025) pp.18 Strontium‑Doped BaZr0.8Ni0.2O3‑δ Cobalt‑Free Cathode Materials for Solid Oxide Fuel Cell
vol.12 iss.4 (2025) pp.13 Understanding Residual Stress and Microhardness Variations in LPBF Fabricated Ti-6Al-4V: Thermo-Mechanical Simulation and Experimental Insights Post Heat Treatment
vol.12 iss.4 (2025) pp.11 Comprehensive Analysis of Current Developments, Challenges, and Opportunities for the Health Assessment of Smart Factory.
vol.12 iss.4 (2025) pp.18 Real-Time Interface Prediction During Laser Processing of Thin Film Layers by High-Resolution Femtosecond Laser-Induced Breakdown Spectroscopy
vol.12 iss.3 (2025) pp.14 Development of an artificial neural network-based model for prediction and compensation of hole depth by femtosecond laser drilling
vol.12 iss.3 (2025) pp.14 Predicting Quality of Coated Layer Based on Meniscus Features Associated with Thickness for Sustainable Roll-to-Roll Processes
vol.12 iss.3 (2025) pp.16 Iterative Semi-auto-labeling Method for High-Frequency Induction Brazing
vol.12 iss.3 (2025) pp.23 AI-Driven Process Optimization Framework for Enhancing Print Quality in Aerosol Jet Printing
vol.12 iss.3 (2025) pp.15 Prediction of Normalized Material Removal Rate Profile Based on Deep Neural Network in Five-Zone Carrier Head CMP System
vol.12 iss.3 (2025) pp.15 Architecture Development of Digital Twin-based Wire Arc Directed Energy Deposition
vol.12 iss.3 (2025) pp.20 Energy Efficiency Optimisation in Wire arc Additive Manufacturing of Invar 36 Alloy via Intelligent Data-Driven Techniques
vol.12 iss.3 (2025) pp.13 Control-Resilient Roller Wear Prediction for Thin Wire Flattening Process via an Internal Sound-Guided Dynamic Conditional Network
vol.12 iss.3 (2025) pp.16 Design of stiffened ribs for improving forming defects of metal bipolar plate for PEMFC
vol.12 iss.3 (2025) pp.16 Data-Driven Approach for Fault Diagnosis of Harmonic Drives Using Wireless Acceleration Sensors and Machine Learning
vol.12 iss.3 (2025) pp.18 Enhancing Tool Wear Prediction Accuracy by Integrating Multi-Task Learning with Cutting Force Estimation
vol.12 iss.3 (2025) pp.21 Optimizing Bio-nano-silica Synthesis Processes from Rice Husk for Industrial-Scale Applications
vol.12 iss.3 (2025) pp.14 AGV Path Planning with Dynamic Obstacles Based on Deep Q-Network and Distributed Training
vol.12 iss.3 (2025) pp.17 Development of a Real-Time Track Solver for Digital Twin of the Underwater Tracked Vehicle
vol.12 iss.3 (2025) pp.14 Autonomous Thin-film Profile Predictions for Inkjet-Printed OLEDs from Aerial Microscopic Images using Deep Learning
vol.12 iss.3 (2025) pp.11 Multi-objective optimization for layout planning of matrix manufacturing system
vol.12 iss.3 (2025) pp.19 Machining and Sustainability Performance Comparison for the Milling Process of Al6082 Alloy Under Various Minimum Quantity Lubrication Conditions
vol.12 iss.2 (2025) pp.22 Flux Filling Rate Effect on Weld Bead Deposition of Recycled Titanium Chip Tubular Wire
vol.12 iss.2 (2025) pp.9 Application of Nanofluid Composite Electrostatic Spraying in Machining of Aluminum Alloy: Effects of External/Internal Fluids
vol.12 iss.2 (2025) pp.17 Integration of Cu-Doped TiO2 Nanoparticles on High Surface UV-Laser-Induced Graphene for Enhanced Photodegradation, De-icing, and Anti-bacterial Surface Applications
vol.12 iss.2 (2025) pp.14 Influence of Mechanochemical Effect on Deformation Behavior of Aluminum Cutting Layer Under Electrostatic Catalysis
vol.12 iss.2 (2025) pp.20 Machining-Induced Damage and Corrosion Behavior of Monel-400 Alloy Under Cryogenic Cooling Conditions: A Sustainable Initiative
vol.12 iss.2 (2025) pp.16 Enhancing Bond Strength Between Carbon Fiber Reinforced Thermoplastic and Aluminum Alloys Through Laser Surface Treatment
vol.12 iss.2 (2025) pp.11 Deposition Stability and Forming Characteristics in Laser-Arc Hybrid Additive Manufacturing of Aluminum Alloy Through Beam Oscillation
vol.12 iss.2 (2025) pp.19 Multiphysics Simulation of Continuous Liquid Interface Production (CLIP) 3D Printing Technology
vol.12 iss.2 (2025) pp.12 Bipolar Current Collectors of Carbon Fiber Reinforced Polymer for Laminates of Structural Battery
vol.12 iss.2 (2025) pp.12 Combinatorial Deposition of Pinhole-Free and High-Performance, Nanothin Electrolyte for Hydrogen-Fueled, Low-Temperature Solid Oxide Fuel Cells Supported on a Porous Substrate
vol.12 iss.2 (2025) pp.8 Techno-Economic Analysis of Grid-Connected Highway Solar EV Charging Station
vol.12 iss.2 (2025) pp.18 Numerical Investigation of In-Line and Staggered Trap Channels in the Serpentine Flow Field of PEMFCs
vol.12 iss.2 (2025) pp.16 Environment-Friendly, High-Performance Lignin-Derived and Polyvinyl Alcohol Blended Resin for All-Green Natural Fiber-Reinforced Composite
vol.12 iss.2 (2025) pp.13 Laser-Ablated Interlaced Micropatterns on CFRP and Ti-64 Plates to Improve Single-Lap Adhesive Joining Strength
vol.12 iss.2 (2025) pp.16 Optimization of Fiber Radiation Processes Using Multi-Objective Reinforcement Learning
vol.12 iss.2 (2025) pp.19 Application of Hybrid Nanofluids in MQL Assisted Machining Operations: Exploring Synergies and Establishing Guidelines
vol.12 iss.2 (2025) pp.33
